Complete furlingsystem
This is the race version of the FlatDeck systems. The difference is the aerodynamic sections – still with double-groove for easy sail changing. The system is ofcourse also great for cruising.
FlatDeck - The new generation of furling systems!
With a FlatDeck you get a furling system with a low profile drum and you benefit from a maximum luff – and in addition you have no risk of overriding thanks to the flat webbing and webbing exit. With this system you also get maximum furling power from the start of the furling, as the webbing has the biggest diameter when the furling starts, and therefore greater power.
Via a swivel fitting the furling is lead back to the cockpit through line leads that are easy to mount at the stanchions. The line leads are included in the package.
The drum and halyard swivel are closed bearings with Torlon balls and needs no maintenance other than rinsing with clean water (at the drum you rinse through the rinsing hole).
The external rotating tack fitting with Torlon balls takes up automatically the sail fullness when furling.
Maintenance: Rinse with clean water only. No oil or grease.
NB: It’s important to rinse the drum through the rinse hole every time it’s been exposed to salt water.
Can I assemble it myself?
The system is fairly easy to assemble, if you have a little ingenuity. Includes detailed assembly instructions in the package (also available under the Downloads tab).
Package includes:
Drum with internal turnbuckle fitting
Furling line (20m high resistance UV webbing) with 15m Ø10mm rope.
Short link plates
Halyard swivel
6 pcs profile sections of 2 m. Rounded with double-groove for easy sail changing.
1 pcs profile section of 1 m.
1 pcs telescopic profile of 1.4 m.
6 pcs connectors
Sail feeder
Bushings
Topcap
Halyard deflector wheel
3 Line leads and 1 lead block
- Everything you need, ready to be installed!
NOTE: Forestay wire is NOT included. This can be added under the tab 'Extra buy'.
This is the race version of the FlatDeck systems. The difference is the aerodynamic sections – still with double-groove for easy sail changing. The system is ofcourse also great for cruising.
FlatDeck - The new generation of furling systems!
With a FlatDeck you get a furling system with a low profile drum and you benefit from a maximum luff – and in addition you have no risk of overriding thanks to the flat webbing and webbing exit. With this system you also get maximum furling power from the start of the furling, as the webbing has the biggest diameter when the furling starts, and therefore greater power.
Via a swivel fitting the furling is lead back to the cockpit through line leads that are easy to mount at the stanchions. The line leads are included in the package.
The drum and halyard swivel are closed bearings with Torlon balls and needs no maintenance other than rinsing with clean water (at the drum you rinse through the rinsing hole).
The external rotating tack fitting with Torlon balls takes up automatically the sail fullness when furling.
Maintenance: Rinse with clean water only. No oil or grease.
NB: It’s important to rinse the drum through the rinse hole every time it’s been exposed to salt water.
Can I assemble it myself?
The system is fairly easy to assemble, if you have a little ingenuity. Includes detailed assembly instructions in the package (also available under the Downloads tab).
Package includes:
Drum with internal turnbuckle fitting
Furling line (20m high resistance UV webbing) with 15m Ø10mm rope.
Short link plates
Halyard swivel
6 pcs profile sections of 2 m. Rounded with double-groove for easy sail changing.
1 pcs profile section of 1 m.
1 pcs telescopic profile of 1.4 m.
6 pcs connectors
Sail feeder
Bushings
Topcap
Halyard deflector wheel
3 Line leads and 1 lead block
- Everything you need, ready to be installed!
NOTE: Forestay wire is NOT included. This can be added under the tab 'Extra buy'.
| Title | Type | Size | Download |
|---|---|---|---|
| FD_brochure.pdf | 472.79KB | Download | |
| Facnor_FDsystem_InstallationManual.pdf | 4.44MB | Download |
